Tiedosto:
Pvm:
18.09.2007 15:36
Koko:
Latauksia:
58 kpl
Kuvaus:
Pitkää odotettu linuxtuki servereille on nyt julkaistu. Tosin betavaiheessa vielä, mutta ehdottomasti todella hyviä uutisia BI:n suunnalta. Ohessa tietoa englanniksi:
ArmA - Linux Standalone Server 1.08
===================================
Copyrigt © 2007 Bohemia Interactive Studio. All rights reserved.
For more information please visit
http://community.bistudio.com/wiki/ArmA:_Dedicated_Server
Installation instructions:
==========================
1. Following programs must have been installed on your Linux-box:
tar, gcc. Optional: md5sum (for setup integrity check)
1a. On some verions of Linux (this was reported for RedHat 9
and Gentoo linux 2.4.20) the NSCD deamon must be installed to
run ArmA server successfully. Caching of DNS would be sufficient.
1b. ArmA Server is using shared libraries. w3c-libwww library must
be installed on your system.
2. Copy the whole "ArmA" directory from Windows
to some Linux-directory (ArmA). DON'T DO ANY DATA CONVERSIONS
(even "dos2unix" translation of text files is not necessary).
Example: you can use PKZIP (WinZip, PowerArchiver, etc.) on
Windows and "unzip" on Linux.
Don't use upper case letters in the ArmA directory name
(/home/bob/arma will be good, /home/bob/ArmA
may cause some troubles).
ArmA directory should contain subdirectories "Addons", "Bin",
"Campaigns", etc.
3. Copy the "server-x.xx.tar.gz" (x.xx is version number) file into
the ArmA directory. Unpack and install it with commands:
arma$ tar -xjf server-x.xx.tar.bz2
arma$ ./install
Watch the messages - they will inform you whether your installation
is successful.
4. Dedicated server can be started in foreground:
arma$ ./server
Or in background:
o$ nohup ./server > out.txt 2> err.txt &
[1] <pid>
5. Running server can be stopped by executing:
$ kill -s SIGINT <pid>
Where <pid> is process-id of mother server thread (printed out in
"nohup" command).
6. ArmA server has a feature: command-line parameter
"-pid=<pid_file>". It causes creation of <pid_file> with
PID of root ArmA process. If IP port specified in "-port=<nn>"
parameter is busy (in usage), ArmA will terminate immediately
and <pid_file> won't be written..
7. The "armaserver" script is provided for automatic server
start/restart/status query/etc. Please be sure to edit
CONFIGURATION PARAMETERS in lines 12 to 18 !
After this is done, install (hard-link?) the script into
"/etc/rc.d/init.d/armaserver" file. After that it can be managed
by "chkconfig" (see info/man).
ArmA - Linux Standalone Server 1.08
===================================
Copyrigt © 2007 Bohemia Interactive Studio. All rights reserved.
For more information please visit
http://community.bistudio.com/wiki/ArmA:_Dedicated_Server
Installation instructions:
==========================
1. Following programs must have been installed on your Linux-box:
tar, gcc. Optional: md5sum (for setup integrity check)
1a. On some verions of Linux (this was reported for RedHat 9
and Gentoo linux 2.4.20) the NSCD deamon must be installed to
run ArmA server successfully. Caching of DNS would be sufficient.
1b. ArmA Server is using shared libraries. w3c-libwww library must
be installed on your system.
2. Copy the whole "ArmA" directory from Windows
to some Linux-directory (ArmA). DON'T DO ANY DATA CONVERSIONS
(even "dos2unix" translation of text files is not necessary).
Example: you can use PKZIP (WinZip, PowerArchiver, etc.) on
Windows and "unzip" on Linux.
Don't use upper case letters in the ArmA directory name
(/home/bob/arma will be good, /home/bob/ArmA
may cause some troubles).
ArmA directory should contain subdirectories "Addons", "Bin",
"Campaigns", etc.
3. Copy the "server-x.xx.tar.gz" (x.xx is version number) file into
the ArmA directory. Unpack and install it with commands:
arma$ tar -xjf server-x.xx.tar.bz2
arma$ ./install
Watch the messages - they will inform you whether your installation
is successful.
4. Dedicated server can be started in foreground:
arma$ ./server
Or in background:
o$ nohup ./server > out.txt 2> err.txt &
[1] <pid>
5. Running server can be stopped by executing:
$ kill -s SIGINT <pid>
Where <pid> is process-id of mother server thread (printed out in
"nohup" command).
6. ArmA server has a feature: command-line parameter
"-pid=<pid_file>". It causes creation of <pid_file> with
PID of root ArmA process. If IP port specified in "-port=<nn>"
parameter is busy (in usage), ArmA will terminate immediately
and <pid_file> won't be written..
7. The "armaserver" script is provided for automatic server
start/restart/status query/etc. Please be sure to edit
CONFIGURATION PARAMETERS in lines 12 to 18 !
After this is done, install (hard-link?) the script into
"/etc/rc.d/init.d/armaserver" file. After that it can be managed
by "chkconfig" (see info/man).
Latausajat:
ADSL 1M 0 min.
ADSL 2M 0 min.
ADSL 8M 0 min.
ADSL 24M 0 min.
* Huom. nopeudet ovat suuntaa-antavia, et välttämättä saa täydellä kaistanleveydellä.
MAINOS
MAINOS
1
Team: Paranoia
18.09.2007 18:45
#1
Team: [10th]
18.09.2007 18:55
#2
Noniin tulihan sen vihdoin. Tätä onkin jo kauan odotettu!
Sanos muuta, ainakin 10th oottelee tosin vielä stabiloitumista ja muiden kommentteja kun toi winserveri tossa suht. hyvin rullaa.
Team: [10th]
25.09.2007 15:00
#3
Noniin tulihan sen vihdoin. Tätä onkin jo kauan odotettu!
Sanos muuta, ainakin 10th oottelee tosin vielä stabiloitumista ja muiden kommentteja kun toi winserveri tossa suht. hyvin rullaa.
10th kanssa käytetty nyt muutaman illan Linux versiota. Ongelmia on ollut mutta viimeiset 2 iltaa on tuntunut pysyvän serveri kunnossa pelien ajan. Ongelmana tällä hetkellä AI käyttäytymisessä havaitut bugit. Ei löydä pelaajaa kunnolla ja menee vain maihin kun pelaaja ampuu AI päin / tappaa puolet AI joukkueesta M9 headshoteilla ;)
Kaikki AI ketkä ovat jonkinmoisissa ajoneuvoissa, lentokoneissa, helikoptereissa, staattisten aseiden ampujina tai missä tahansa muualla kuin maassa kävelemässä kahdella jalalla ase kädessään on havaittu olevan normaaleja käyttäytymisen suhteen ja tappaneen erittäin tehokkaasti pelaajia.
Edit 27. syyskuuta
Nyt ne saivat sen AI toimimaan. Rankkaa ottaa turpaa kun ehti jo tottua ramboilemaan niitä vastaan ;)
1